WN32P Replacement Indoor Temperature/Humidity/Pressure Sensor for or Gateway or Console
Couldn't load pickup availability
Before purchase, please be aware of the following:
The WN32P sensor can be added to the Ecowitt HP consoles and gateways as the main source for indoor temperature, humidity, and pressure readings.
Only one WN32P sensor can be connected to the console for indoor data.
This sensor can also be used with HP consoles and gateways that typically have an internal sensor, allowing the external sensor to be placed further away from the unit. Please note, older models may require a firmware update to support this sensor.
Features:
-
Measures indoor temperature, humidity, and pressure
-
Compatible with HP25xx or HP350x weather station consoles
-
Can be used with newer consoles and gateways, overriding the built-in sensor
-
LCD display shows temperature, humidity, and pressure readings
Specifications
| Measurement | Range | Accuracy | Resolution |
| Barometric | 300 to 1100 hPa (8.85 to 32.5 inHg) | ± 5hPa | 0.1hPa (0.01 inHg) |
| Temperature (Indoor) | -10°C to 60°C (-14°F to 140°F) | ± 0.3°C (± 0.6°F) | 0.1°C (0.1°F) |
| Humidity (Indoor) | 1% to 99% | ± 5% | 1% |
However the screen display of the sensor might not work below 14F(-10C).
Battery: 2 x AA 1.5V battery
Transmission between gateway and sensor
Transmission distance in open field: 100 m (330 ft.) depend on environment
RF frequency: 433/868/915 MHz depending on location
Updates on the gateway: About 64 seconds
Channel: One only
Parts List
1 * sensor
Packaged information
Length * Width * Height: 123*42*14mm
Weight: 140g
Battery: No
Compatibility Instructions
for all ecowitt network consoles
Please follow the table to make sure you choose the right sensors and concoles before check out.
Note: The "1/4/8/16" means 1 console supports 1/4/8/16 sensors
( excluding accessories )
