1. Home
  3. Sensor
  5. WS90 Wireless 7-in-1 Electronic Sensor Array Haptic Rain Gauge and Ultrasonic Anemometer

WS90 Wireless 7-in-1 Electronic Sensor Array Haptic Rain Gauge and Ultrasonic Anemometer

$149.99 USD
$149.99 USD
Shipping is calculated at checkout. (For EU customers: For parcels shipped via [Standard], VAT is included.)
Radio Frequency: North America MHz 915
How to choose frequency
Ecowitt WS85 Solar Powered 3-in-1 Weather Sensor for Rainfall, Wind Speed and Wind Direction
ecowittEcowitt WS85 Solar Powered 3-in-1 Weather Sensor for Rainfall, Wind Speed and Wind Direction
$149.99 USD
$149.99 USD

Please note when purchasing:

This WS90 cannot be upgraded to the Powered by Shelly version. If you need the WS90 Powered by Shelly version, please purchase this one: WS90 Powered by Shelly. Do not buy the wrong one. Thank you.

Features

Sensor: Piezoelectric rain gauge; Ultrasonic wind speed, gust speed, 

and wind direction; Temperature; Humidity; Solar light intensity and UV index;

Waterproof IPX5;

Services

Need a console to use.

Compatible gateways / consoles (Wi-Fi and/or Cellular):  GW1100/GW1200/GW2000/GW3000/WS6210/HP2550/HP2560/HP3500/WS3800/WS3820/WS3900/WS3910/WN1920/WN1980/WN1820/WN1821/WN1900/WN1910/WN1700

Note: 
1. The sensor may share the same channels with other sensors of the same type.

2. Some data is cloud-only and not available on compatible consoles.

3. Compatibility may change with product updates. Please refer to the latest compatibility table(at the bottom of the product page) or contact us for confirmation.

4. Pole not included, pole diameter size recommendation: 1 inch (25.4mm).

WS90 Sensor Array Winter Use Recommendation: For reliable operation in frost and snowy conditions, we recommend purchasing the optional 12V extension cord power supply (sold separately). It can both heat and act as a power supply, but please note the following points:

1. We recommend our customers use a 12V power supply because there is a heating plate inside the battery compartment of WS90, the purpose of the heating plate is to melt the snow covering the battery compartment (snow will affect the wind speed measurement). Moreover, with a 12V power supply, the power cable can be stretched longer. 

2. Be sure to pay attention!!! The supply voltage range can only be 5~20V, more than that will be very dangerous and will cause damage to the WS90.

Specifications (Sensor)

Measurement Range Accuracy Resolution
Wind speed 0m/s to 40m/s <10m/s, ±0.5m/s; ≥10m/s, ±5% 0.1m/s
Wind direction 0° to 359° <2m/s, ±10°; ≥2m/s, ±7° 1°
Temperature -40°C to 60°C ±1°C (± 1.8°F) 0.1°C (± 0.2°F)
Humidity 1% to 99% ±3.5% 1%
Light 0Klux to 200Klux ±15% 0.1Klux
UVI 1 to 15 ±2 1
Rain 0 to 9999 TBA 0.1mm

Sensor solar panel (built-in): 6.5V/4mA

Sensor (backup): 2 x AA 1.5V battery (not included)


Transmission between gateway and sensor

Transmission distance in open field: 150 m (500 ft.) depend on environment

RF frequency: 433/868/915/920 MHz depending on location

Sensor reporting interval: 8.8 seconds


Parts List

1* WS90 sensor

1* User manual

 

[WS90 Manual & Firmware](https://s.ecowitt.com/MP7YJJ)

Compatibility Instructions

for all ecowitt network consoles

Please refer to the table to choose the correct sensors and consoles before checkout.
Note:
1) "1/4/8/16" = max number of sensors supported per console (excluding accessories).
2) Upload only = sensor readings shown only in the Ecowitt app and cloud (www.ecowitt.net).
3) Firmware (e.g. V1.9.6 / V2.0.2) = gateway/console must run this version or newer.