HP2560_C 7'' TFT Display Console with Indoor Temp&Humidity Sensor Antenna
Couldn't load pickup availability
Features
Indoor display for wittboy and other sensor array, built-in WiFi gateway, Barometric, Temperature, Humidity;
Services
Weather servers support: Ecowitt; Wunderground; Weathercloud; WeatherObservationWebsite; Customized (Homeseer; Homeassistant;)
Specifications (HP2560_C display)
| Measurement | Range | Accuracy | Resolution |
| Barometric | 300 to 1100 hPa (8.85 to 32.5 inHg) | ± 5hPa | 0.1hPa (0.01 inHg) |
| Temperature (Indoor) | -10°C to 60°C (-14°F to 140°F) | ± 0.3°C (± 0.6°F) | 0.1°C (0.1°F) |
| Humidity (Indoor) | 1% to 99% | ± 3.5% | 1% |
USB to 2.5*0.7mm DC 5V power plug connector cable: 5V ⎓ 1.0A 5.0W
Transmission between gateway and Wi-Fi router
Transmission distance in open field: 50 m (165 ft.) depending on router and environment
Wi-Fi: 2.4G 802.11 b/g/n
Updates on the Internet: Customize 1-5 minutes (recommend 1 minute)
Parts List
1* HP2560_C Display/Console
1* USB to 2.5*0.7mm DC 5V power cord
NOTE: It is not a standalone product and needs to be used in conjunction with other sensors.
 |  | |
|---|---|---|
| Built-in sensor measurement | ||
Pressure |
|
|
Indoor Thermo-Hygrometer (Temp & Humidity) |
|
|
| Display Content | ||
Relative Pressure |
|
—
|
Indoor Temperature |
|
—
|
Indoor Humidity |
|
—
|
| Power | ||
Power cord supply |
|
|
Battery supply |
|
|
| Connection & Data | ||
LAN |
|
|
Wi-Fi (2.4G only) |
|
|
RF Wireless protocol |
|
|
SD Card |
|
|
| Addable | ||
Ecowitt IoT Device |
|
|
Ecowitt Sensor |
|
|
Compatibility Instructions
for all ecowitt network consoles
Please refer to the table to choose the correct sensors and consoles before checkout.
Note:
1) "1/4/8/16" = max number of sensors supported per console (excluding accessories).
2) Upload only = sensor readings shown only in the Ecowitt app and cloud (www.ecowitt.net).
3) Firmware (e.g. V1.9.6 / V2.0.2) = gateway/console must run this version or newer.
