- Soil Moisture Meter: measures soil moisture content within 72 seconds to let you know when to water your plant
- Digital LCD Display: with lovely flower pot icon to directly display the moisture level, easy to read
- Indoor & Outdoor Use: waterproof moisture sensor, can be used for indoor outdoor potted plants, lawn, garden and more
- Custom Mode: with 0%AD and 100%AD custom mode to manually calibrate the low/high moisture value so that you can get more accurate result for different soil types
- Time Display: With 12/24hr digital time display; 2 AA batteries(not included) needed for the display console and soil moisture sensor(one for each)
Features:
Measures moisture content of soil.
With 0%AD and 100%AD custom mode to manually calibrate the low/high moisture value so that you can get more accurate result for different soil types
Indoor or outdoor use.
Time Display
Specifications:
Moisture Range:0~100%; Resolution: 1%
0%AD setting range:70~200; Initial value:70
100%AD setting range:0%AD+10~1000; Initial value:500
Update Rate: 70 seconds
Base station (display console) : 1 x AA battery(not included)
Remote sensor : 1 x AA battery(not included)
Soil Moisture Sensor Usage & Warranty Notes
-
Check the soil before installation
Do not insert the sensor directly into hard, compacted soil or soil containing rocks, gravel, bricks, roots, or other hard objects. -
Proper installation
Loosen the soil or create a pilot hole using a shovel, spade, or soil auger before inserting the soil sensor vertically. Apply steady pressure and avoid excessive force. -
Do not
Do not force the sensor into hard soil or twist, rock, or wiggle it during installation. -
Warranty
If the probe encounters hard objects, applying excessive force or moving the sensor side to side may break the internal PCB and damage the sensor. Damage caused by improper installation is not covered under warranty.
Package Included:
1* WH51 Sensor
1* WH0291_C Display/Gateway/Console
1* Manual
Compatibility Instructions
for all ecowitt network consoles
Please refer to the table to choose the correct sensors and consoles before checkout.
Note:
1) "1/4/8/16" = max number of sensors supported per console (excluding accessories).
2) Upload only = sensor readings shown only in the Ecowitt app and cloud (www.ecowitt.net).
3) Firmware (e.g. V1.9.6 / V2.0.2) = gateway/console must run this version or newer.