Enhanced Omnidirectional Antenna with Magnetic Base for GW3000 Gateway Only
Couldn't load pickup availability
Features
-
360° omni-directional antenna with magnetic base
-
Specifically designed for the GW3000 gateway, for indoor use
-
Range up to 350M (open areas)
-
3M SMA cable with adapter included
- Optional 5M extension cable(≈25% signal loss)
Here is a video of the omnidirectional and Yagi antenna tests:
https://www.youtube.com/watch?v=HPSlaD6H4YM
We conducted tests in an open environment using the GW3000 gateway with the omnidirectional antenna, paired with WH51 and WS90 sensors. The WH51 reached up to approximately 220 meters, and the WS90 up to 350 meters. Actual range may vary depending on terrain and environmental conditions.
Specifications
| Product Name | Enhanced Omni-directional Antenna |
| Antenna Type | Magnetic Mount Antenna |
| Frequency Range | (868/915MHz) |
| Input Impedance | 50Ω |
| V.S.W.R | < 2.2 |
| Gain | 0.9dBi |
| Polarization Type | Vertical |
| Power capacity | 50W |
| Dimensions | 110 × ⌀30mm |
| Connector Type | SMA-K (Female, inner thread & pinhole) |
| Cable Type | RG174 |
| Cable Length | 3M |
| Material | Carbon Steel |
| Weight | 50g |
| RoHS Compliance | Yes |
| Operating Temperature | -45 ~ +85℃ |
| Product Name | Enhanced Omni-directional Antenna |
| Antenna Type | Magnetic Mount Antenna |
| Frequency Range | 433 MHz |
| Input Impedance | 50Ω |
| V.S.W.R | < 2.5 |
| Gain | -0.9dBi |
| Polarization Type | Vertical |
| Power capacity | 50W |
| Dimensions | 183 × ⌀30mm |
| Connector Type | SMA-K (Female, inner thread & pinhole) |
| Cable Type | RG174 |
| Cable Length | 3M |
| Material | Carbon Steel |
| Weight | 50g |
| RoHS Compliance | Yes |
| Operating Temperature | -45 ~ +85℃ |
Note
1. To ensure optimal reception, please keep at least 50 cm between the antenna base and the gateway. If the distance is less than 50 cm, signal interference may occur and affect reception performance.
2. For outdoor use, pls ensure the connector is properly waterproofed.
3. Do not bend or excessively twist the antenna.
4. For best results, install the antenna in an open area with minimal interference.
Packing list
1 x Enhanced Omni-directional Antenna with 3M SMA Connector Cable
1 x Adapter (for the older version female SMA antenna outlets)
1 x User Manual
Compatibility Instructions
for all ecowitt network consoles
Please refer to the table to choose the correct sensors and consoles before checkout.
Note:
1) "1/4/8/16" = max number of sensors supported per console (excluding accessories).
2) Upload only = sensor readings shown only in the Ecowitt app and cloud (www.ecowitt.net).
3) Firmware (e.g. V1.9.6 / V2.0.2) = gateway/console must run this version or newer.
