Ecowitt LDS01 Laser Distance Sensor, Laser Rangefinder for Water Tank Levels and Snow Depth with LCD Screen for Real-Time Monitoring
Couldn't load pickup availability
Specifications
Model: LDS01
Name: Laser Distance Sensor
Dimensions of Probe: 87*64*87mm
Dimensions of Host: 102*25*49mm
Dimensions of battery compartment: 113*103*61mm
Cable Length: 1.5m
Measurement full field of view angle(FFOV): 5°
Material of Screen: HTN-LCD
Material of Plastic Casing: The main unit is made of PC+ABS, and the sensor probe is ASA.
Unit: M / Ft
Laser measurement: 4cm to 4m
Laser measurement (under the natural light): 4cm to 3.5m
Laser measurement accuracy: ±1.2 cm (2.5~60 cm) / ±0.047 ft (0.08~1.97 ft);±2% (60~400 cm) / ±2% (1.97~13.12 ft).
Laser measurement resolution: 0.01m
Data transmission interval when water level fluctuates: 10 seconds
Measurement (Display update) interval: Normal Mode: 20s；Fast Measurement Mode:10s
Data reporting Interval: Normal Mode:79.75s; Fast Measurement Mode:10s
RF Connection Frequency: 920/915/868/433MHz (depending on local regulations)
RF Wireless Range (in open areas): Over 100 meters (in open areas)
Operating Temperature Range of the laser distance measurement module & main display unit: -20°C to 50°C(-4℉ to 122℉)
Battery Life(With heating function enabled): 300days (Under normal usage intensity)
Ingress Protection Rating: IP65
Power Supply: 8*AA 1.5V alkaline batteries(not included)
Power (With heater disabled): 0.366 mW
Power (With heater enabled): 0.708 W
Compatibility
The LDS01 is compatible with GW1200, GW2000, GW3000, WS6210_C gateways, and HP2550_C, HP2560_C, WS3800/3900/3910, WN1920_C, WN1980_C, WN1820_C, WN1821_C display consoles(needs to be upgraded to the latest firmware), supporting up to 4 LDS01 units.
Packing list
Single Unit:
1 x LDS01 Laser Distance Sensor
1 x Manual
Starter Kit:
1 x LDS01 Laser Distance Sensor
1 x GW1200 IoT gateway
1 x USB extension cable for powering the gateway (no data)
1 x Cable clip
1 x Manual
1 x Quick start
4G Wi-Fi Kit:
1 x LDS01 Laser Distance Sensor
1 x Manual
1 x WS6210_C 4G & Wi-Fi Weather Station Mobile Gateway
6 x Hose Clamp(3 * Fits pipe diameter: 46-70mm & 3 * Fits pipe diameter: 21-38mm. Choose according to the need)
2 x Hose Clamp Brackets
4 x M5*8 Screws
1 x SD13 to USB Data Cable, , length 50cm/19.7 inch
1 x User Manual
1 x Quick Start
8 x AA rechargeable NiMH batteries
1 x Nano-SIM card
1 x Micro SD card 8G
1 x Solar panel with cable, length 70cm/27.6 inch
1 x Galvanized Bracket for solar panel
3 x Screws for solar panel
Compatibility Instructions
for all ecowitt network consoles
Please follow the table to make sure you choose the right sensors and concoles before check out.
Note: The "1/4/8/16" means 1 console supports 1/4/8/16 sensors
( excluding accessories )
The LDS01 works basically (the proper air distance is shown on the LDS01 Display) and the HP2551 has found the LDS01 as well.
The depth value in the sensor settings on the HP2551 has been done and works, also the sensor name change has been applied sucessfully.
But there is one issue we have already written to the ecowitt support, waiting on their reply. The LDS01 and its values could be seen on the HP2551 sensor page but NOT on the main display page of the HP2551.
The FW of the HP2551 has been updated to the latest provided V2.03.
Waiting on the advise what needs to be done to see the LDS01 values on the main display page.
I had been needing a water level monitor for my home water tank but the options cost nearly a thousand dollars. This monitor is inexpensive and works well with my Ecowitt 2551 PWS. Simple to install and integrated easily into my current setup. Just needed to upgrade the PWS console firmware. Highly recommended.
The Ecowitt LDS01 Laser Distance Sensor proved to be an excellent solution to resolve my measuring isues of a water tank.
ok
The snow depth is shown on the Hp2550, but it is not sent to the WS app or a Customer server.
Hi dear, the latest Wi-Fi firmware for the HP2550 series and other related devices is scheduled to be released this month. Once the update is available, the LDS01 data will be able to upload to the server. We appreciate your patience and understanding.
