WH0295 Air Quality Monitor, with WH45 PM2.5/ PM10/ CO₂/ Temperature/Humidity 5-in-1 Indoor Air Quality Sensor and Display
Couldn't load pickup availability
Layout
| Data Indicator and Sensor status | |
| CO₂ | |
| PM2.5/PM10 | AQI index |
| Temperature | Humidity |
-
Integrated hanging hole
-
Tabletop stand
-
°C/°F button
-
MAX button
-
Battery compartment
-
Battery cover
Features
PM2.5 PM10 CO₂ Temperature Humidity
°C/°F switch LCD display
Specifications（WH0295 console）
Specifications（WH45 sensor）
| Measurement | Range | Accuracy | Resolution |
| PM2.5 | 0 ~ 999ug/m³ |
>100ug/m3, ± 15% <100ug/m3, ± 15ug/m³ |
1ug/m³ |
| PM10 |
0 ~ 999ug/m³ |
>100ug/m3, ± 25% <100ug/m3, ± 25ug/m³ |
1ug/m³ |
| CO₂ | 0 ~ 40000ppm | 400-10000ppm ± (30ppm+3%) | 1ppm |
| Temperature | -40°C ~ 60°C (-40°F ~ 140°F) | ± 1°C or ± 2°F | 0.1°C or 0.1°F |
| Humidity | 1%~99% | ± 5% | 1% |
Specifications (Transmission between console and sensor)
| Line of sight wireless transmission (in open air) | 100 m (300 ft.) |
| Frequency | 433/868/915 MHz depending on location |
| Update Rate | 1 minute |
Specifications (Power)
| Display Console | 1 x AA Alkaline or Lithium batteries (not included) |
| 5-in-1 Air Quality sensor | 2 x AA Alkaline or Lithium batteries (not included) |
1.USB mini-B type cable to be connected from a USB power port with 1.0A current supply is needed.
2.The peak current during air sensing is about 0.3A and happens at once per minute frequent.
Parts List
| 1 | WH45 5-in-1 Air Quality Sensor |
| 1 | WH0295_C Display Console (Receiver) |
| 1 | USB Cable |
| 1 | User Manual |
Packaged information
| Length * Width * Height | 112*112*50mm |
| Weight | 150g |
| Battery | None |
Compatibility Instructions
for all ecowitt network consoles
Please follow the table to make sure you choose the right sensors and concoles before check out.
Note: The "1/4/8/16" means 1 console supports 1/4/8/16 sensors
( excluding accessories )
Customer Reviews
The WH0295 Air Quality Monitor was very simple to setup, pretty much Plug-and-Play. Just add the (2) AA Alkaline or Lithium batteries to the WH45 sensor, and (1) AA Alkaline or Lithium battery to the WH0295 display and you are good to go. The sensor was discovered right away on my Ecowitt HP2561BU console and worked perfectly.
great
