WN34S Temperature Sensor with Stainless Steel Probe

Regular price $14.99
Regular price $20.99 Sale price $14.99
Shipping calculated at checkout.
Packaged version & Sensor or gateway link frequency: North America MHz 915
WN34S - ecowitt (7263976030370)
Regular price $14.99
Regular price $20.99 Sale price $14.99
  • Measures water temperature with a 30cm (11.81inch) stainless steel probe
  • Long wireless range up to 300 feet (100 meters) in open areas
  • Transmits readings every 77 seconds
  • IP65 waterproof
  • Can work alone with a LCD screen
  • Can work with GW1000/GW1100 or HP2551/HP3500/HP3501 weather station console
  • Supports up to 8 channels(additional sensors sold separately)



Temperature Sensor

• Measures temperature with a 3m (10ft) cabled sensor for the cabled version or a 30cm (11.81inch) stainless steel probe sensor for the probe version.

• Extended wireless range up to 300 feet (100 meters) in open areas.

• Transmits readings every 77 seconds.

• IP65 waterproof.

• LCD display for current reading. 

When paired with a GW1100/GW2000 Wi-Fi Gateway:

• View temperature reading on the Live Data page of the WS View Plus app (requires that the gateway and your phone are using the same Wi-Fi network).

• Up to 8 channels supported. Channel names can be edited on the app.

• Battery level information displayed on the WS View Plus App.

When paired with a Weather Station Console (HP2551/HP3500/HP3501):

• View temperature data in real-time on the Display.

• Up to 8 channels supported. Channel names can be edited on the console.

When uploaded to Ecowitt Weather Server:

• View current temperature data, history records and graph on the website.

• Receive email alerts from the server.

• Remote monitoring with smart phone, laptop, or computer by visiting the website.


This temperature sensor has two versions: a probe version (WN34S) and a cabled version (WN34L) as your selection. The probe sensor is mainly used to test the soil temperature, while the cabled version is mainly used to test water temperature. 

The two versions will be recognized as the same sensor type by the software. If you purchased both, they will share the eight channels together and the total supported quantity of the two sensors could not exceed eight for one receiver.


Power: 1x1.5V AA battery (not included)

Sensor type: Epoxy Sealed Thermistor of NTC

Frequency: 433 / 868 / 915 MHz depending on location (North American: 915 MHz; Europe: 868MHz; Other areas: 433MHz)

Wireless transmitting range: 100M (300feet)

Sensor reporting interval: 77 seconds

Sensing temperature: -40~60 °C(40~140 °F)

Cable sensor length: 3m (10ft)

Probe sensor length: 30cm (11.81inch)

Battery life: 12 months minimum

Waterproof  level: IP65

Package List:

One Temperature Sensor

One Mounting bracket for sensor

One Hose clamp for mounting to pole

One Hexagon M12 screw for mounting

One Screw ST D3.2*M2.0*6 for mounting

One User Manual

Compatibility Instructions

for all ecowitt network consoles

Please follow the table to make sure you choose the right sensors and concoles before check out.
Note: The "1/4/8/16" means 1 console supports 1/4/8/16 sensors
( excluding accessories )

Customer Reviews

Based on 6 reviews
All Sensor Works Perfect

I use Lightning, CO2, 2.5&10 PPM, Soil, Ultrasonic Wind.
Best Performance👍


Cliff Chism
Works great on the ranch

Using 2 of them to measure the soil temperature at 4 and 10 inches. I love how these sensors just automagically add themselves to our Wittboy Pro system, just by inserting the battery. I should add that they seem to be very sturdy since i had to push them pretty hard to get them into the hard clay soil in an Oklahoma USA summer. No damage at all, even to get one to 10” deep.

Works perfectly

I like to keep an eye on the ground temprature to detect frost, this does the job as expected.

steve wiggs
Soil temp probe

Quality item, set up automatically using the Ecowitt gateway, great device.

Sensor work good

Received in 14 days. Well packed, delivery w/o remarks. Installed on my ranch 4 days ago. Connected to my GW1100 in few minutes. I just need to understand the voltage value of the battery which I installed. Li-ion type AA has an initial voltage of 1.9V, but I have 1.6V as shown.