WN32 Outdoor Temperature and Humidity Sensor, Single-Channel Thermo-hygrometer for Outdoor data (Note: Each compatible gateway/console can connect to only one WN32.)
Couldn't load pickup availability
Before purchase, please be aware of the following:
The WN32 sensor serves as your primary source for outdoor temperature and humidity readings.
When used with a multi-sensor array, the WN32 will override the built-in temperature and humidity readings of other devices (such as WN67, WS69, WS80, WS90, WittBoy models). It’s ideal for separating your temperature and humidity data from the main array. However, if you need an additional set of readings, consider using the WN31 instead.
Only one WN32 sensor or multi-sensor array can be set as the primary device for reporting temperature and humidity to online services via the gateway or console.
This cannot be used as an additional sensor; please opt for the WN31 multi-channel sensor.
Make sure to enable the T&H sensor option on your console or gateway before the readings are recorded.
Features
Humidity & Temperature on LCD screen;
One channel to work with one console only;
Feels like, App temp and Dew point on console that it is linking;
Outdoor Humidity & Temperature coded replacing your outdoordata of sensor array under the same console;
Specifications
| Model | WN32 |
| Name | Outdoor sensor unit(temp/humidity) |
| Dimensions | 122.3×42×18(mm) |
| Screen Size | 21.8×26.1(mm) |
| Weight | 45(g) |
| Material of Plastic Casing | ABS |
| Material of Screen | TN-LCD |
| Temperature Metering Range | -40°C to 60°C(-40℉ to 140℉) |
| Temperature Metering Accuracy | ±1°C(±1.8℉) |
| Temperature Metering Resolution | 0.1°C, or 0.1°F |
| Humidity Metering Range | 1%RH to 99%RH |
| Humidity Metering Accuracy | ±5%RH |
| Humidity Metering Resolution | 1%RH |
| Reading Update Interval | About 60 seconds |
| RF Connection Frequency | 920/915/868/433MHz (depending on local regulations) |
| RF Wireless Range | Over 100 meters (in open areas) |
| Operating Temperature Range of LCD Screen | -10°C to 50°C(14℉ to 122℉) |
| Operating Temperature Range | -40°C to 60°C(-40℉ to 140℉) |
| Waterproof Rating | IP44 |
| Power Supply | 2 AA Batteries (not included) |
| Battery Life | 1 Year |
Packaged information
Length * Width * Height: 123*42*14mm
Weight: 140g
Battery: No
 |  |  | |
|---|---|---|---|
| Built-in sensor measurement | |||
Pressure |
|
|
|
Thermo-Hygrometer (Temp & Humidity) |
|
|
|
| Display Content | |||
Relative Pressure |
|
|
|
Indoor Temperature |
|
|
|
Indoor Humidity |
|
|
|
Outdoor Temperature |
|
|
|
Outdoor Humidity |
|
|
|
Multi-Channel Thermo-Hygrometer (Temp & Humidity) |
|
|
|
Dew Point |
|
|
|
Wind Chill |
|
|
|
| Power | |||
Battery supply |
|
|
|
| Connection & Data | |||
RF Wireless protocol |
|
|
|
| Addable | |||
Rain Shield |
|
|
|
| Others | |||
IP Rating |
|
|
|
Compatibility Instructions
for all ecowitt network consoles
Please refer to the table to choose the correct sensors and consoles before checkout.
Note:
1) "1/4/8/16" = max number of sensors supported per console (excluding accessories).
2) Upload only = sensor readings shown only in the Ecowitt app and cloud (www.ecowitt.net).
3) Firmware (e.g. V1.9.6 / V2.0.2) = gateway/console must run this version or newer.
