Ecowitt WH51L Wireless Soil Moisture Meter with 1M PVC Wire – Soil Sensor with Display, AD Value, and Real-Time Monitoring for Garden, Farm, and Greenhouse
15% OFF Code: XMAS2024 (Dec 16 - Dec 29 PST)
Couldn't load pickup availability
Features:
- Measures soil moisture content every 70 seconds in standard cycle and transmit the data via RF.
- When the current measurement is significant difference from the next time data, RF will enter into quick-transmit state and WH51L will transmit the data every 10 seconds.
- Custom Mode: with 0%AD and 100%AD custom mode to manually calibrate the low/high moisture value so that you can get more accurate result for different soil types. This mode can only be activated through WSViewplus app and in live data display mode.
- Long wireless range, up to 300 feet (100 meters) in open areas.
Overview:
|
1 |
Soil Moisture Sensor Probe |
|
2 |
1m/3.28ft PVC Wire |
|
3 |
LCD Display |
|
4 |
Battery Compartment |
Specifications:
Moisture Range: 0~99%
Accuracy: ±5%
Resolution: 1%
Working Temperature Range: -10°C to 50°C (14℉ to 122℉)
0%AD setting range: 0~200
Initial value: default to factory calibration
100%AD setting range: 0%AD+10~1000 Initial value: default to its factory calibration
Frequency: 915/868/433MHz depending on location (North American: 915MHz; Europe:868MHz; Other areas: 433MHz)
Sensor reporting interval: 70 seconds
Transmission distance in open field: 100m (300 feet)
Device Housing Waterproof Level: IP66
Sensor Probe Waterproof Level: IP68
Package Included:
- One Soil Moisture Sensor
- One Screw ST D5.8*M3*15 Stainless Steel PA for Mounting
- One Stainless Steel Loop 19~298mm for Mounting
- One Fix Bracket 35.1x21x20mm Stainless Steel for WN51L
- One User Manual
 |  |  | |
|---|---|---|---|
| Built-in sensor measurement | |||
Soil Moisture |
|
—
|
|
Multi-Channel Temperature |
—
|
|
—
|
| Power | |||
Battery supply |
|
|
|
| Connection & Data | |||
Radio Frequency (RF) |
|
|
|
Compatibility Instructions
for all ecowitt network consoles
Please follow the table to make sure you choose the right sensors and concoles before check out.
Note: The "1/4/8/16" means 1 console supports 1/4/8/16 sensors
( excluding accessories )
Customer Reviews
Highly recommended for monitoring the moisture level deep in your pot, or bed of soil!!!
The sensor shows reasonable volumetric values with clean water, however the datasheet gives no infos about the measurement frequency, which is relevant for the influence of minerals ( https://en.m.wikipedia.org/wiki/Permittivity ). Next summer will show if it works.
I have used Ecowitt's shallow moisture meters for a couple years and love them. Since I am in 15gal pots, I needed something that went deeper. I love the Ecowitt interface with Bluetooth and wifi, and the fact I can get my data anywhere, but at the time I started using the shallow ones, I was unaware there was a deeper moisture meter, or perhaps they just came out…I found out about Ecowitt from the BuildASoil.com Youtube series couple years ago. So, needing a deep moisture meter, I tried for two grow seasons the Blumats digital moisture meter. They are very expensive and they stop working at the crucial time of flowering/fruiting. They have replaced them very slowly under warranty, but they keep stopping giving a readout…thus far I have had 3 out of four gone bad. I was so happy to find out just recently, again via BAS videos, that you now have a deep version, with both a local digital readout plus the usual bluetooth/wifi through the same hub I previously had for the shallow meters. Blumats doesn’t have any way to connect to their meters other than faulty digital readout on the unit you push into the soil. Ecowitt is the best, the most reasonably priced, and useable faultlessly for years. Well done Ecowitt, and keep innovative products like these coming!
Works great gonna buy another one
Fonctionne exactement comme prévu, même à grande distance
